| Jammin Products X1-CRT Option Parts |
 |
 |
 |
| Tire Balancer Part: 20004 Fits: All 1/8th scale buggy or truggy tire/wheel - any brand Description: Hand held balancer only. Be like the pros and balance your tires. Makes 1/8th buggy ot truggy more stable. |
Tire Balancer Stand Part: 20005 Fits: All 1/8th scale buggy or truggy tire/wheel - any brand Description: Balancer stand only. To be used with Hand Held Balancer. Clamp Balancer into stand for hands free balancing. Makes for easier and quicker job. |
Jammin Steel Flywheel Part: 41115 Fits: All X2, X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Steel Flywheel fits all .21 and .28 engines. Smoother acceleration, better handling, higher fuel mileage, less stalling, and improved lap times. |
 |
 |
 |
| Super Big Bore 16mm Rear Springs Part#: See Below Fits: X1X-CR, X1X-RTR, X1X-CRT, X1X-RTR-CRT Description: Springs sold in pairs; #41021 = Yellow, #41022 = White, #41023 = Blue, #41024 = Silver, #41025 = Grey |
Super Big Bore 16mm Front Springs Part#: See Below Fits: X1X-CR, X1X-RTR, X1X-CRT, X1X-RTR-CRT Description: Springs sold in pairs; #41026 = Yellow, #41027= White, #41028 = Blue, #41029 = Silver, #41030 = Grey |
Red Aluminum Clutch Shoes Part: 40926 Fits: X1X-CR, X1-CR, X1-CR-FTE, X1-RTR, X1X-RTR, X1-CRT, X1X-CRT, X1X-RTR-CRT, X1-CRT-RTR, CRT.5, CRT.5-RTR Description: CNC Machined Aluminum clutch shoes from special alloy. Light weight with instant throttle response. Beveled edges to prevent mushrooming. Long lasting low wear. For 3 shoe clutches. 1.0mm & 1.1mm Springs & shims included |
 |
|
 |
| 16mm Super Big Bore Front Shocks Part: 41001 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Large diameter shocks for less fade and smoother suspension action. Includes 1 pair front shocks. Springs not included. |
16mm Super Big Bore Rear Shocks Part: 41002 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Large diameter shocks for less fade and smoother suspension action. Includes 1 pair Rear shocks. Springs not included. |
5 X 10 MM Clutch Bearings Part: 40683 Fits: X1X-CR, X1-CR, X1-CR-FTE, X1-RTR, X1X-RTR, X1-CRT, X1X-CRT, X1X-RTR-CRT, X1-CRT-RTR, CRT.5, CRT.5-RTR Description: Direct replacement clutch bearings for the standard Jammin Clutches with 5 x 10mm bearings. Ultra Long Lasting and Super Tough. |
 |
 |
 |
| 2 Piece Engine Mount Part: 40623 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: 2 Piece engine mounts allows removing and replacing the engine in the chassis without changing or adjusting the gear mesh or throttle linkage. |
CNC Center Diff. Mount Part: 40679 Fits: X1-CRT, X1-CRT-RTR Description: CNC Machined Center Diff Mount with new style offset brake cams. Includes Carbon Fiber top brace. Super strong brakng. |
Ring and Pinion Gear Set Part: 40626 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Direct replacement ring and pinion gear set for front and rear differentials. Stronger material and new tooth design add up to a smoother more efficent gear mess. |
 |
 |
 |
| CRT Mud Gaurds Part: 40698 Fits: X1-CRT, X1-CRT-RTR Description: Mud Gaurds bolt to the chassis behind steering to protect the chassis running gear from mud and debris. |
Tank Lid Puller Part: 40620 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Make your pit stops faster with this new tank lid pull trigger. Available in Red (40620R), Black (40620BK), or Blue (40620BL). Adjustable length. |
CNC Rear Hubs Part: 40609 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC MachinedBillet Rear Hubs add super strength. Includes new additional camber rod location hole. |
 |
 |
 |
| CNC Steering Arm Rack Part: 40607 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Machined Steering rack with bearings. 4mm thick super strong. |
CNC Front Top Plate Part: 40608 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Machined front gearbox top plate. 4mm thick super strong. |
Pro Aluminum Clutch Shoes Part: 10013 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Machined Aluminum clutch shoes. Long lasting low wear. For 3 shoe clutches. 1.0mm & 1.1mm Springs included |
 |
 |
|
| Rear Sway Bar Kit Part: 40585 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: 2.3mm and 2.8mm front anti roll bar. |
Front Upper CNC Arm Mount Part: 40586 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Machined Upper "A" Block. Replaces plastic part. |
Front Sway Bar Kit Part: 40584 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: 2.3mm and 2.5mm front anti roll bar. |
 |
 |
 |
| Engine Monomount Part: 40590 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Low CG, fins allow better heat dispersal, one-piece reduces crankcase stress from flex for a longer engine life. Allows for easier gear mesh adjustments. |
CNC "Z" Brace Part: 40696 Fits: X1-CRT, X1-CRT-RTR Description: CNC Aluminum chassis Z Brace adds strength to center area of chassis. Reduces flex so clutch bell does not contact to chassis under extreme loads. |
Front or Rear Torsion Differential Part: 10596 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: 43 tooth gear is direct fit. Increases drive to unloaded wheel for more aggressive handling. |
 |
 |
 |
| Alum. Radio Tray Posts Part: 40582 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Aluminum radio tray posts hard anodized. Strengthens radio tray area. |
Light Weight Diff. Outdrives Part: 40596 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Reduces overall and rotating weight. 1 set = 2 pcs. |
Lunsford Titanium Turnbuckle Kit Part: 40697 Fits:X1-CRT or X1-CRT-RTR Description: Complete kit includes Camber Links(4), Tie Rods(2) & Servo Link(1). Also comes with adjusting Tool and Stickers! Light weight and super strong. |
 |
 |
 |
| Shock Springs - Red (Medium) Part: 40644 Fits: X1-CR-FTE, X1-CRT, X1-CRT-RTR Description: Medium tension shock springs for big bore shocks. 2 Front & 2 Rear. |
Shock Springs - Yellow (Soft) Part: 40645 Fits: X1-CR-FTE, X1-CRT, X1-CRT-RTR Description: Medium tension shock springs for big bore shocks. 2 Front & 2 Rear. |
3.5 CNC Rear Toe-In Plate Part: 40576 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized, 3.5 degrees toe in for more rear traction. |
 |
 |
|
| 3.0 CNC Rear Toe-In Plate Part: 40575 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum, 3.0 degrees toe in block replaces plastic part for durability. |
Wingstay Posts Part: 40583 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum Hard anodized. Replaces plastic parts to make wing mount stronger |
