| Jammin Products X1-RTR Option Parts |
 |
||
| Jammin Steel Flywheel Part: 41115 Fits: All X2, X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Steel Flywheel fits all .21 and .28 engines. Smoother acceleration, better handling, higher fuel mileage, less stalling, and improved lap times. |
 |
 |
 |
| Tire Balancer Part: 20004 Fits: All 1/8th scale buggy or truggy tire/wheel - any brand Description: Hand held balancer only. Be like the pros and balance your tires. Makes 1/8th buggy ot truggy more stable. |
Tire Balancer Stand Part: 20005 Fits: All 1/8th scale buggy or truggy tire/wheel - any brand Description: Balancer stand only. To be used with Hand Held Balancer. Clamp Balancer into stand for hands free balancing. Makes for easier and quicker job. |
Super Big Bore 16mm Front Springs Part#: See Below Fits: X1X-CR, X1X-RTR, X1X-CRT, X1X-RTR-CRT Description: Springs sold in pairs; #41026 = Yellow, #41027= White, #41028 = Blue, #41029 = Silver, #41030 = Grey |
 |
|
 |
| 16mm Super Big Bore Front Shocks Part: 41001 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Large diameter shocks for less fade and smoother suspension action. Includes 1 pair front shocks. Springs not included. |
16mm Super Big Bore Rear Shocks Part: 41002 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Large diameter shocks for less fade and smoother suspension action. Includes 1 pair Rear shocks. Springs not included. |
Super Big Bore 16mm Rear Springs Part#: See Below Fits: X1X-CR, X1X-RTR, X1X-CRT, X1X-RTR-CRT Description: Springs sold in pairs; #41021 = Yellow, #41022 = White, #41023 = Blue, #41024 = Silver, #41025 = Grey |
 |
 |
 |
| 2 Piece Engine Mount Part: 40623 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: 2 Piece engine mounts allows removing and replacing the engine in the chassis without changing or adjusting the gear mesh or throttle linkage. |
Ring and Pinion Gear Set Part: 40626 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Direct replacement ring and pinion gear set for front and rear differentials. Stronger material and new tooth design add up to a smoother more efficent gear mess. |
5 X 10 MM Clutch Bearings Part: 40683 Fits: X1X-CR, X1-CR, X1-CR-FTE, X1-RTR, X1X-RTR, X1-CRT, X1X-CRT, X1X-RTR-CRT, X1-CRT-RTR, CRT.5, CRT.5-RTR Description: Direct replacement clutch bearings for the standard Jammin Clutches with 5 x 10mm bearings. Ultra Long Lasting and Super Tough. |
 |
 |
 |
| CNC Center Diff. Mount Part: 40610 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: CNC Machined Center Diff Mount with new style offset brake cams. Includes Carbon Fiber top brace. Super strong brakng. |
Tank Lid Puller Part: 40620 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Make your pit stops faster with this new tank lid pull trigger. Available in Red (40620R), Black (40620BK), or Blue (40620BL). Adjustable length. |
CNC Rear Hubs Part: 40609 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC MachinedBillet Rear Hubs add super strength. Includes new additional camber rod location hole. |
 |
 |
 |
| CNC Steering Arm Rack Part: 40607 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Machined Steering rack with bearings. 4mm thick super strong. |
CNC Front Top Plate Part: 40608 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Machined front gearbox top plate. 4mm thick super strong. |
Pro Aluminum Clutch Shoes Part: 10013 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Machined Aluminum clutch shoes. Long lasting low wear. For 3 shoe clutches. 1.0mm & 1.1mm Springs included |
 |
 |
 |
| Engine Monomount Part: 40590 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Low CG, fins allow better heat dispersal, one-piece reduces crankcase stress from flex for a longer engine life. Allows for easier gear mesh adjustments. |
Wingstay Posts |
Screw Type Hinge Pins Part: 40581 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Stronger Hard Coating, relieved in the center for less bind, no e-clips needed. |
 |
 |
 |
| 3.5 CNC Rear Toe-In Plate Part: 40576 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized, 3.5 degrees toe in for more rear traction. |
Alum. Radio Tray Posts Part: 40582 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Aluminum radio tray posts hard anodized. Strengthens radio tray area. |
X1 Chassis 7075 CNC Part: 40564 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: 7075 CNC Aluminum hard anodized and machined for light weight. |
 |
 |
 |
| Front Shock Tower Part: 40565 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: 4mm thick 7075 CNC Aluminum billet with hard coating. Replaces original part for more strength. |
Rear Shock Tower Part: 40566 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: 4mm thick 7075 CNC Aluminum billet with hard coating. Replaces original part for more strength. |
Carbon Fiber Radio Tray Part: 40567 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: Graphite radio tray adds strength and light weight. Includes personal transponder mount. |
 |
 |
 |
| Carbon Fiber Front Plate Part: 40568 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Graphite front plate for lighter weight and strength. |
Carbon Fiber Center Diff Plate Part: 40569 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Graphite top plate for center diff. mount is lighter weight and adds strength. |
Hard Coated Steering Knuckle Part: 40570 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum, Hard Coated for added durability. |
 |
 |
 |
| CNC "Z" Brace Part: 40579 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: CNC Aluminum chassis Z Brace adds strength to center area of chassis. Reduces flex so clutch bell does not contact to chassis under extreme loads. |
Universal Joint, Rear Part: 40571 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: Replaces dog bone and rear axle for added traction and smoother acceleration. |
Universal Joint, Center Part: 40572 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: Replaces dog bone front and rear center drive shafts for smoother drive train and easier maintenance. |
 |
 |
 |
| 3.0 CNC Rear Toe-In Plate Part: 40575 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum, 3.0 degrees toe in block replaces plastic part for durability. |
2.5 CNC Rear Toe-In Plate Part: 40577 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum, 2.5 degrees toe in block replaces plastic part for durability. |
Front Sway Bar Kit Part: 40584 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Two additional sizes of anti-roll bar for the front end adds more tuneability. 2.3mm and 2.5mm bars. |
|
 |
 |
| Rear Sway Bar Kit Part: 40585 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Two additional sizes of anti-roll bar for the rear end adds more tuneability. 2.3mm and 2.8mm bars. |
CNC Front Upper "A" Block Part: 40586 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized upper front suspension "A" block replaces stock plastic part for added durability |
CNC Front Lower "A" Block Part: 40587 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized lower front suspension "A" block replaces stock plastic part for added durability |
|
|
 |
| CNC Front Upper "B" Block Part: 40588 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized upper front suspension "B" block replaces stock plastic part for added durability |
CNC Front Lower "B" Block Part: 40589 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized lower front suspension "B" block replaces stock plastic part for added durability |
Lunsford Titanium Turnbuckle Kit Part: 40670 Fits:X1-CR, X1-CR,FTE, or X1-RTR Description: Complete kit includes Camber Links(4), Tie Rods(2) & Servo Link(1). Also comes with adjusting Tool and Stickers! Light weight and super strong. |
 |
|
|
| 1.0 CNC Rear Anti-Squat Plate Part: 40592 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized 7075, 1.0 degrees anti-squat plate. |
2.0 CNC Rear Anti-Squat Plate Part: 40593 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized 7075, 2.0 degrees anti-squat plate. |
3.0 CNC Rear Anti-Squat Plate Part: 40594 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: CNC Aluminum hard anodized 7075, 3.0 degrees anti-squat plate. |
 |
 |
 |
| Front or Rear Torsion Differential Part: 10596 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: 43 tooth gear is direct fit. Increases drive to unloaded wheel for more aggressive handling. |
Front or Rear Torsion Differential Part: 10597 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: 48 tooth gear is direct fit with 12.2:1 gear ratio. Increases drive to front or rear with lesser load for more aggressive handling. |
Light Weight Center Diff. Posts Part: 40595 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: Aluminum, Hard Coated. Reduces weight. |
 |
 |
 |
| Light Weight Diff. Outdrives Part: 40596 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Description: Reduces overall and rotating weight. 1 set = 2 pcs. |
Light Weight X1 Chassis 7075 CNC Part: 40564 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: 7075 CNC Aluminum hard anodized finish. Relieved for reduced weight without sacrificing strength. |
Red Aluminum Clutch Shoes Part: 40926 Fits: X1X-CR, X1-CR, X1-CR-FTE, X1-RTR, X1X-RTR, X1-CRT, X1X-CRT, X1X-RTR-CRT, X1-CRT-RTR, CRT.5, CRT.5-RTR Description: CNC Machined Aluminum clutch shoes from special alloy. Light weight with instant throttle response. Beveled edges to prevent mushrooming. Long lasting low wear. For 3 shoe clutches. 1.0mm & 1.1mm Springs & shims included |
 |
 |
 |
| Rear Shock Tower - CNC 5mm Part: 40599 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: CNC Aluminum 7075, 5mm thick. Super strong and light weight. Hard Anodized |
Front Shock Tower - CNC 5mm Part: 40598 Fits: X1-CR, X1-CR-FTE, X1-RTR Description: CNC Aluminum 7075, 5mm thick. Super strong and light weight. Hard Anodized |
Front Shock Absorber Big Bore Part: 40630 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Springs not included Description: Big bore, threaded, hard anodized shock body - new dirt shield with felt seal - improved cap and larger bladder |
|
 |
 |
| Rear Shock Absorber Big Bore Part: 40631 Fits: X1-CR, X1-CR-FTE, X1-RTR, X1-CRT, X1-CRT-RTR Springs not included Description: Big bore, threaded, hard anodized shock body - new dirt shield with felt seal - improved cap and larger bladder. |
Shock Springs - Yellow (Soft) Part: 40645 Fits: X1-CR-FTE, X1-CRT, X1-CRT-RTR Description: Medium tension shock springs for big bore shocks. 2 Front & 2 Rear. |
Shock Springs - Red (Medium) Part: 40644 Fits: X1-CR-FTE, X1-CRT, X1-CRT-RTR Description: Medium tension shock springs for big bore shocks. 2 Front & 2 Rear. |
